Gallery
Slideshow by lindamay
2399 views since January 23, 2010.
Get a link button for this slideshow »
Make and share your own slideshow »
1 of 22
Mechanical PMC Necklace
bronze and copper washers act as links to this PMC necklace of 3 discs with spacers that are linked (prior to firing) with washers from the hardware store.
Photo by xlindamayx
2 of 22
necklace global sml
Global view of green clay, PMC standard necklace pieces. Bronze and copper washers link the pieces. Pieces are turned over with some of the tubing set for linking. The solid discs will be applied to the backs once all the linking and tubing is complete. Once the clay is set in place permanently (glued with slip or water) the entire piece will be fired together.
Design by Hadar Jacobson
Photo by xlindamayx
3 of 22
necklace detail of texture sml
Detail of texture applied to the first layer of PMC. A disc will be cut from bronze/copper and attached later by solder when piece is fired.
Design by Hadar Jacobson
Photo by xlindamayx
4 of 22
necklace detail of linking sml
close up of linking detail. Pencil marks to remind me of placement of pieces can be seen. The bronze washers are smaller than the copper ones, so the tubing has to be of a smaller diameter. The tubing for the connection of the copper washers shows a snug fit. Once the clay is fired it shrinks about 33%, so there will be more room for rotation on the washers at that time. The outer tubing pieces will have a single hole drilled to allow attachment of the neck chain for the piece.
Design by Hadar Jacobson
Photo by xlindamayx
10 of 22
andreas view 2
metal clay from push mold created from a design (in ceramic clay) by Andrea Mora.
embedded in bronze clay (unfired) as yet.
Photo by xlindamayx
13 of 22
SteamPunk necklace v V
Bronze (clay) and silver (clay) beads, hung from a rubber cord
Photo by xlindamayx
14 of 22
SteamPunk necklace v IV
Bronze (clay) and silver (clay) beads, hung from a rubber cord
Photo by xlindamayx
15 of 22
SteamPunk necklace v III
Bronze (clay) and silver (clay) beads, hung from a rubber cord
Photo by xlindamayx
16 of 22
SteamPunk necklace v II
Bronze (clay) and silver (clay) beads, hung from a rubber cord
Photo by xlindamayx
17 of 22
SteamPunk necklace v I
Bronze (clay) and silver (clay) beads, hung from a rubber cord
Photo by xlindamayx
18 of 22
Blood Orange Medalion
Fine silver center piece (constructed), inlayed with tinted grout, set onto a stitched, felted, beaded background. Future incarnations, in bronze and copper, are made from a custom push mold.
Photo by xlindamayx
19 of 22
Hinged Pendant (ala Hadar Jacobson)
Silver Clay pendant with torn-edged pieces. Hinged with fine silver wire. Stainless steel chain, Bronze and Copper Clay beads (Hadar's Powder).
Photo by xlindamayx
21 of 22
Silver pendent, bronze bead
Earth mother symbol designed by Andrea Mora (in ceramic), and used as a push mold for the silver clay. Stainless steel chain. Bronze Clay, extruded bead with red glass beads.
Photo by xlindamayx
22 of 22
textured hollowform color
Silver Clay hollow form (formed around beach rock) and textured piece added. Stainless steel chain with bronze components and red glass beads
Photo by xlindamayx